Do you know what makes a lawn truly beautiful? While you might think that mowing it would do the trick, the truth is that doing so without edging won’t be enough. Edging a lawn is not that heard, and it helps keep the weeds off your garden, driveway, and sidewalk. Unfortunately, most people do not know how to edge a lawn, so they make do with just a simple mowing.
If you really care about your lawn and your garden, then you should definitely take the time and learn how to do it properly. First, you would need to invest in the right tools and appropriate enough time to actually work on your lawn or garden. But what are these tools exactly?
Things You Will Need for Edging a Lawn
So, have you decided to learn how to edge a lawn? Here are the things you will need to gather in order to do a job as good as that of a pro:
- Power edger
- Manual lawn edger
- Weed whacker or hand shear
Now you might be wondering why you need both power and manual lawn edgers. Well, the truth is that some power edgers are not too great when it comes to edging curves and corners. In cases such as this, you would need to use a manual lawn edger to edge the curves properly.
How to Edge a Lawn: A Step-By-Step
Once you have prepared all the tools we have listed above, then you can now start. Here, we will provide you with an easy-to-follow, step-by-step guide on how to do it properly:
Step 1 – Create a Guide
The first step is crucial, especially for rookies at edging a lawn. What you need to do is set some lines or boundaries to guide your edging. As a starter, you would want to be careful and set your goals straight. Use the rope to lay out a path where the edging cuts are to be made.
If you do not have a rope, you can use your garden hose or any string for the time being. In fact, anything that has enough length and weight to define lines could work. However, if you are edging along obvious paths, such as a sidewalk, you may not even need to define lines at all.
Step 2 – Start Edging
If you need to make a straight edging, then we recommend that you start from an end. On the other hand, if you need to edge curves, you should start from the center and work your way outwards. Then again, this also depends on the type of edger that you are using.
When using a power edger:
- Take a position that allows you to hold the edger and control the path firmly.
- Engage your core and keep your posture straight.
- Try edging in the backyard first to get some practice before edging your front lawn.
- Ever so slowly, start edging and maintain this slow speed as rushing it might get you off track.
When using a manual edger:
- Firmly and slowly push the tool with your feet and rotate the blade first from left to right and then from right to left.
- Mind your posture to avoid straining your back.
- As you do your work, remember to stay straight. This can be achieved by overlapping cut marks.
Ideally, you should be cutting only two inches deep at most. In addition, keep in mind and be careful of any wires or pipes, and many others buried underneath. Most standard power edgers can easily reach this two-inch depth, which probably is enough to control the root spread too.
Step 3 – Check Your Lines
As you edge your lawn, remember to cut the turf every few minutes to make sure that you are creating clean lines. This can be done by simply standing a few feet away and looking at the area that you have already covered. If you notice imperfections, go ahead and repeat the process where you may have wobbled.
Step 4 – Mind the Flowers!
When edging garden beds, use a spade to deepen the cuts to at least four or five inches. This is especially true if the flower beds are lower. Otherwise, you can choose the depth that is appropriate for the position of the bed.
Start from inside the bed when cutting into the bottom as this makes removing the turf rather easier. Ideally, you should do this at a 90-degree angle. Keep in mind that the end goal is to keep everything consistent from end to end, regardless of the angle you choose.
Additionally, you would also want to be extra careful when edging around trees and shrubs. This can be done by using either of the two edgers—manual or power.
The latter is used if the roots of the tree are extensive. Digging into the soil can be risky given that the roots are rather old. You do not want to cut any roots when trying to edge now, do you?
Step 5 – Final Touches
By now, you are almost done. All that is left is to perfect the edges. If you think that using your power lawn edger will prove to be too much, then you can use a weed whacker or a hand shear as an alternative. With this, you would need to cut the grass back, parallel to the trench edge.
Lastly, and since you are probably beaming with excitement to use your new machine, remember to do so in a responsible and controlled fashion. Never overdo it, or your lawn would end up with patches.
A Few Tips from the Pros
The tools you just used to edge your lawn and make it all pretty deserve all the care that they need. Therefore, remember to clean them after every use. Here are some other useful tips and tricks on how to care for your edger:
First, clean the blades using clean water. Afterward, dry it completely and store away in a safe place. For power edgers, refer to the instructions written in the manual regarding proper maintenance, cleaning, and storage.
Obviously, if you clean and maintain it well, then it will definitely last longer and give a better performance. The same goes for manual edgers in that they may require filing from time to time. When it comes to power edgers, though, the blades are not the only things that require your attention. Hence, you should check for nicks regularly.
The Final Words
Edging a lawn can give your front yard and backyard a sophisticated look and make anyone who looks at it feel good as well. It is great for the trees and garden beds too. Therefore, you should edge your lawn every once in a while to ensure that it looks healthy and happy. You never know, you might even enjoy it!
Then again, never forget that you are working with very sharp blades and that your safety is imperative. Thus, before starting, make sure that the coast is clear so as to also avoid edging where edging is not required.